In Constant->Signal->Hardware setting, Make setting for Input- PLC Through
I've tried to tick the box for the Standard I/O group to be used through the PLC but after that it asks me to power cycle the controller and the setting is not changed after restart.
Hi!
I've been getting the hang of programming a AX20 nachi controller with a lot of success, but i cant seem to get the Internal PLC to read the physical standar input inside the controller.
I used the standard i/o inputs inside the controller till now with the plc disconnect without a problem, but cant seem to get it work with the PLC reading it.
A documentation about the plc programming would help me a lot but even a small example would be good to just have it work.
