Hello,
The company I work at break lots of teach pendant cables on robots and instead of buying a new 10m or 20m cable every time we were wondering if it's possible to just cut the broken end off and solder a new plug onto it. It doesn't worry us that the cable will slowly get shorter and will buy a new cable and repeat the process when the cable gets too short.
The robot controllers we are having the problems with are, R-30iA, R-30iB, R-30iB Plus, R-J3iB.
I don't know the teach pendant numbers off the top of my head but am able to locate them if need be.
The end of the cable that keeps breaking is on the pendant end.
I have been looking into some replacement plugs and I believe this plug should work but just wanted to get some more opinions on it.
If the plug is correct then would someone be able to attach wiring schematics for the plug, cable and pendant.
Thanks in advance.
