Hello,
Thanks for the help.
We found the problem, it turned out to be that the transformers were incorrectly connected
Hello,
Thanks for the help.
We found the problem, it turned out to be that the transformers were incorrectly connected
Hello, kwakisaki
Thank you for the congratulations.
Now RTPM(1FH board) is installed at work and DIP switches are configured according to the manual.
We tried to configure it, but unfortunately there is no reaction. Can you tell me in which manual i can see more details?
Hello,
There were difficulties with setting the RTPM at work with the FA010L-A001, D controller.
When running the “rtmon1” command, the value in the Cur.Act (A) column is 5.30A.
If we set the “Weld Current” 5 A in “Arc weld condition modify” menu, RTPM starts to work correctly, but the changes are so small that the effect of RTPM is not visible.
We tried to configure GAIN in the “Tracking Gain/Bios” menu, but the effect was insignificant.
How to configure Cur.Act (A) that the values are the same as on the welding machine (150-200А)?