i think it really is a corrupted firmware, but kuka send us a way for recovery/update for smart pad 2, where a software is downloaded directly from kuka's website
i didn't found a software like that for smart pad 1, maybe the way of recovery is the same for smart pat 1 just with another firmware/software?
Recapitulating, the smart pad has arrived with this problem, and i think ti was updating when the old operator or old owner unplugged from the control unit
hello, i'm using a smart pad that doesn't start, it's a smart pad that the company bought , along with the robot and controller, the original controller is a krc4, and the robot a kr6 r900 sixx
but alung with this, the smart pad doesn't boot, and i cannot update the firmware, im trying to update with another krc4 controller v8.3.39 and the smart pad its just freezed, doesnt ask for none updates, its just freezed.
where i can find the software for updates? or how can i fix it?
I did not found an especific irc5p manual, but check on their library, maybe you'll find something especific for your application
