Finally it could not be solved. ABB sent us a new flexpendant under warranty.
Posts by josemagr
-
-
Hi all
Hope you are very well.
I have a new CRB1100 with a few hours of use, and it has an error that I couldn't fix on the FlexPendant. It freezes several times, and after rebooting and starting the FlexPendant again, it gave this error on boot.
The error is 0xc0000428, which I understand is a digital signature error when windows is booting, and I can't get out of it. The error more to do with the driver or RobotWare version, seems to be a Windows error on the FlexPendant.
I tried:
- restart via the reset button on the flexpendant
- connect via MGMT port and upgrade FlexPendant version
- when connecting via MGMT port and connecting online with RobotStudio, everything is ok and you can see the configuration, properties, current position, etc.
- connect a keyboard to the flexpendant and press the F1 key, in addition to the F7 F8 F12 keys
- press the Esc key on the connected keyboard, which leads to the BIOS.
It is a rare error , I share it on the forum to see if anyone has any idea of how to solve it.
Thanks!
-
I am in doubt if I buy a DSQC652 I / O card from a supplier other than ABB.
Will I have no problems connecting and using it on my IRC5 controller with DeviceNet?
My IRC5 has 709-1 DeviceNet Master / Slave.
Is an activation necessary for it to recognize the DSQC652 card?
Thanks!