Posts by freak

Hi,

What is the normal component to extend some analoginput to a KRC4 Compact?

I will do some measurement on a robotpicker to evaluate the highest point on a picked piece. I think, i will need a fast analog input module?

kind regards

Would it not be possible to just enlarge the array of Workspaces?

No, just do the changes in Programming and download it. Switch to Configuration, reopen Project from Controller, make changes and then download it. Go back to Programming, synrchonize to Controller, makes changes and download. And so on....

It doesnt worked to set it directly in the machinedata.

Kuka sent me a LDP.xml file, which I had to replace in

C:\KRC\Roboter\Config\User\Common\Mada

, now it works.

Thank to all for helping.

Thank you, I will try it tomorrow.

I have the same PROBLEM. Better?

Well, you have typed 92 characters and it will never helps anyone.

For all who wants to help:

I've checked all the topics/tips above. I have the same Robot running on a KRC4 and there I can activate the load data verfication.

KR50R2100

8.7.5

Tool is defined.

$LDC_LOADED = FALSE

Anyone has a solution to this problem? I have the same...

Hey

I have a Kuka Smartpad 2 from a KRC5 and a KUKA Smartpad 2 from a KRC4. I want to use one of these at a KRC4 Controller which has been updated from 8.3 to 8.6.9.

Can i plug it without any problems?

Kind regards

Freak

Thank to all!

I didn't know that i can't change the version over WoV. I thought i can change the last number of the version with WoV.

I have done that already, the problem is I can't download it.

WoV pops a failmessage that the version in the project doesn't match with the controller.

Hi

Anybody knows how i can change the Version of my Contorller from 8.6.8 to 8.6.7? I have tried with WoV and then changed the Version i download to controller. But every time I try this it fails with the message that the version don't match. Can anybody help me?

Greets F

Could it be that the inlineform is older than 8.3 and because of this the inlineform does not work?

I try tomorrow to change on 8.3 once and then load to 8.5.

Hi fubini

The problem is i can't change any options on the "old" points.

Hey panicmode

I can't press change on the 8.3 inlineforms on the 8.5 controller.

I think this is because of the version.

Is there any other possibility?

Good Morning

Is there any way to change a 8.3 Point Ptp/Lin to 8.5 oder higher point?

Greetings F

hi M

I'm very interested! Please read yout PM.

Happy New Year