Posts by monred

thank you for your help.I have fix my problem.

I have closed my pc and

reopen the file and pc but it is not working. the error message says that my simulation camera
authorize failed and

It may be that the security settings rejected the camera connection

thank you in advance.

my mate model is LR mate 200id

I use the io to control the Indicator light Glow but when I gave the signal DO(101), the Indicator light did not glow. Should I change my wiring?
thank you in advance.

After the alarm SRVO-231heppend, I pressed the reset, the LED in the mate is something wrong. and I want to know how to fix the problem.

thank you in advance.

ok, I will try it. Thank you for your help.

I have fixed this problem. Thanks for your help.

sorry, my roboguide language is Chinese, and that it is my machine link，I did not use any parts in the machine, just my link in the machine.

thank you for your answer help me a lot.

The machine and its parts disappeared.

thanks in advance! g2h4v-n35ht.mp4

After I did that all.I do not completely fix it at all. What I want to do is to pick up the parts which are lied down, so what should I do next?

Thanks for your help again. I will try to fix my problem.

The parts in vision that have the same color as their background are difficult to find.

Thanks in advance,

pasted-from-clipboard.png

I finally fixed my problem, after I changed the path of the machine. It is all fine.

Thanks for your help, but that is not the point. My problem is that my parts with their machine disappeared bizarrely when I running auto.