Author Topic: UR10 with a HandyScan 700  (Read 240 times)

0 Members and 1 Guest are viewing this topic.

Offline FramatomeSM

  • Newbie
  • *
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 3
UR10 with a HandyScan 700
« on: May 15, 2018, 09:18:48 AM »
Hello  :biggrins:
We have a project with a UR10 and a HandyScan 700 (3D Scan).
But, actually the start button is on the HandyScan and i don't know how to start the scan from the UR10.
I have contacted Creaform for some information about this but i got no response.
I've seen a cell from 3D Infotech and they start the scan from the robot so i know that his possible.
If anyone can help me or know somebody from a Universal Robot distributor who already worked on this technology. 
Thanks.  :icon_wink:

Offline FramatomeSM

  • Newbie
  • *
  • Thank You
  • -Given: 0
  • -Receive: 0
  • Posts: 3
Re: UR10 with a HandyScan 700
« Reply #1 on: July 02, 2018, 08:22:45 AM »
Maybe it can help somebody but finally Creaform answered me about this solution.
So you need I/O Modules R-Series, it is a electric box for the communication (EtherNet/IP for Fanuc and on-off control for UR) and a software called VxIO Module, for the configuration.
It can control a HandyScan 700 and a MetraScan, you cannot control a GoScan.
Most important, it is very simple to start, but you need a little training.
Voilà.