Hi ABB fans, here a new device for ABB Robots. From S3 to M2000
FlexiDriveMV - Floppy Drive Update to SD card or USB PenDrive
This is a direct replacement for the floppy drive unit.
You remove the actual 3.5” floppy drive, connect the FlexiDrive and that’s all.
You will not use floppy disks any more.
You will use a standard SD memory card. You can storage up 2500 floppies in a single SD card.
Also for old KUKA's, Kawasaki's, FANUC's, or any industrial machine!
I hope this is interesting for you. Thanks. more info on:
www.floppyemulator.com
http://www.floppyemulator.com/robot-abb-s3/
S3 "Prog Unit Communication Fault"
- rodman
- Thread is marked as Resolved.
-
-
Hi ABB fans, here a new device for ABB Robots. From S3 to M2000
FlexiDriveMV - Floppy Drive Update to SD card or USB PenDrive
This is a direct replacement for the floppy drive unit.
You remove the actual 3.5” floppy drive, connect the FlexiDrive and that’s all.
You will not use floppy disks any more.
You will use a standard SD memory card. You can storage up 2500 floppies in a single SD card.
Also for old KUKA's, Kawasaki's, FANUC's, or any industrial machine!
I hope this is interesting for you. Thanks. more info on:
www.floppyemulator.com
http://www.floppyemulator.com/robot-abb-s3/ -
Hello 👋
I’ve problem after self testing this is happening