Hi All,
I am busy commissioning a KR140 with PalletTech 4.0.
The Client has “slip sheets” as well as “Layer Boards” that are used on most of their SKUs. When creating an instruction, I am only able to select 1 of the two products. Is there an option to add an additional slip sheet type as they have their own respective infeed stations.
Below is an example of a typical SKU that the customer would want to program.
L1 = Layer Board/Slip Sheet
L2 = Carton
L3 = Carton
L4 = Slip Sheet
L5 = Carton
L5 = Carton
L6 = Layer Board
Layer Board = 5mm Cardboard
Slip Sheet = 2mm Black Plastic
