so i set up irvision and got it on Microsoft edge the latest version and even enabled iexplorer mode but when i go to vision set up it gives me a message saying i need iexplorer 7or above. now if it needs the actual internet explorer how would i get that
vision setup requires internet explorer 7 or above
-
Toxic dj -
March 19, 2025 at 7:12 PM -
Thread is Unresolved
-
-
SkyeFire
March 19, 2025 at 7:14 PM Approved the thread. -
so i set up irvision
What version?
My most recent go-round with the "newest" irVision was about a year ago, and I had no issues using Edge, although I did have to enable IE-mode specifically for the robot IP address and the session, IIRC. Although newer Fanucs seem to like Chrom perfectly well.
-
im not sure about the version of irvison but i did enable ie mode. how do i check the virsion of irv and update it
-
I've stumbled in the same problem some time ago.
iRVision from V9 works properly on newer computers. From V7 or V8 is another history.
IE is buried so deep in the last versions of Windows 10 that even most common tricks doesn't work anymore
My solution was using a third part application called Friex Browser, from the company Backdate Software.
I don't know what was the black magic in it, but from within this software, you can invoke IE again.
https://backdate.de/friex.html