IRC5 teach pendant manual

    Hey guys, I have read numerous references here regarding resetting the tpu.

    On starting up, Reset by pressing button one, and touchscreen calibration with button 4..... etc

    Is this described in a manual anywhere?
    I've been through all the IRC5 ones I have and found nothing.

    I have 1 pendant with all sorts of errors and 1 with a dodgy touchscreen so I thought I'd try and troubleshoot...

    When starting up, do buttons 2 and 3 do anything?
    There must be manual or something for you guys to know this in the first place!

    Operating manual - IRC5 with FlexPendant (tradew.com)

    page 316 for touchscreen calibration

    The tech for the touchscreen is very basic...basically 2 thin films that contact each other to complete the circuit when you press on it...if you happen to get a hot piece of spatter and burn a hole through the top layer, cleaning the screen can render the unit useless till it drys out...had that issue before. You can buy replacement screens on ebay if you need.

Advertising from our partners