Hi, my CF card of my multirobot system is defective.
I have created a new system in Robotstudio using the system builder and loaded it onto the CF card. Will my system start with it, or do I need a ghost image and have to install the created system via usb stick?
That is my System:
>>PRODUCTS_ID:
RobotWare Version: 5.15.9149.15
RW Control module key
RobotWare OS and English
644-2 German
709-x DeviceNet
709-1 Master/Slave Single
840-2 Profibus Fieldbus Adapter
603-1 Absolute Accuracy
604-2 MultiMove Independent
SingleProcess
608-1 World Zones
611-1 Path Recovery
613-1 Collision Detection
614-1 FTP and NFS client
616-1 PC Interface
617-1 FlexPendant Interface
623-1 Multitasking
RW Drive module 1 key
ABB standard manipulator
IRB 140 Type C
140-6/0.8
Drive System '04, 140/1400
RC1 No add drive
RW Drive module 2 key
ABB standard manipulator
IRB 140 Type C
140-6/0.8
Drive System '04, 140/1400
RC1 No add drive
>>ROBOT_TYPE:
140-6/0.8
140-6/0.8
