Hi, guys. I cannot browse the controller on WorkVisual(it just doesn't appear, even if I put the IP address manually). The equipments are connected by Ethernet. The PC is able to ping the controller and the PLC can send signals to it as well.
I've already tried changing the IP(of both robot and PC) and utilizing the KSI, however it didn't work. Besides, the projects on the TP do not appear either(it shows the message "the installed projects cannot be determined". Possibly that is related, isn't?). The red "X" isn't appearing though. Would I be missing anything?
KSS 8.3.18
KR 16 1610
KRC4