Greetings!
Im pretty new at robot programming in general and i have some problems i dont know how to solve.
I noticed a problem with our robot 1-06VXH25-A1(AR2010) with YRC1000 Controller
I wanted to set the Inform Language to Expanded, but after changing it via SETUP - TEACHING CONDITIONS ---> EXPANDED, then reseted the data via DATA - RESET INSTRUCTION. Even powered the Robot OFF and back on, still no Expanded instructions.
Went to check the parameters and the Parameter S2C211 is set to 2 (Expanded LVL)
Any ideas what could be wrong and how to solve this ?
Ty for your help!