Hi ,
I tested telnet in my roboguide, login kcl ,but only display the KCL menu ,i can not write cmd in the "telnet 127.0.0.1" .
for the "SET UP TELNET " , KCL Access is " input" . Dose it (write cmd in the telnet window) work only in the actual robot?
anyhelp will be appreciated ~!
Take a look at this SDK, which implements Telnet and whose documentation describes how to use Telnet with Roboguide.
In a nutshell, the trick is to define the KCL/CRT device in Port Init.
After a cold start, you'll be able to write to the KCL window. You can also have a look at the services.txt file, which contains a new KCL port to which you can connect via Telnet.
Alfred Thank you for your reply , it's very usefull~！
