Open HMI when cycle start a cell in FANUC Roboguide

    Hello, one of my friends that uses FANUC roboguide (not sure what version), has find a way to when you cycle start a cell, it immediately open the HMI on the TP while running the program, in the same time.

    Im trying to search a way to do it but the closest thing i found about it was the Menu Utilly software options
    Anything about it or the menu utility will help

    Edited once, last by zFery: I needed to add more information and clarify what i was asking (December 13, 2024 at 2:16 PM).

  • zFery December 13, 2024 at 2:17 PM

    Changed the title of the thread from “Open HMI when start in roboguide” to “Open HMI when cycle start a cell in FANUC Roboguide”.

    I managed to solve it! When using the Menu Utility Additional Package, it adds several options that can be used during start-run, such as yes/no prompts.

    One of these options is named "DSP_WEBP",to use it, simply press CALL PROGRAM, select Macro at the bottom of the TP, and find it in the list. After that, you'll need to assign a [Constant] to it. In my case, the constant was 2.

    Just a reminder, for this to work, you need to have your HMI assigned to the TP by navigating to System Variables and setting the TX_SCREEN variable.

    I'm not sure if anyone else has been looking for this or is interested, but if you have any questions, feel free to ask. I’ll do my best to help! :top:

Advertising from our partners