Hi !
I just recently installed a new robot in production line (a M-410iB, with a R30iA cabinet), it's second hand but it has a lot of nice options like Ethernet/IP adapter and scanner.
My problem is when i try to publish all the Tag Set from my NX (4bytes in and 4bytes out), TP is lagging, until it's completely frozen and just need a forced power cycle.
Without Tag Set pushed, I can ping perfectly the robot.
Robot is configured as Adapter.
I verified all combination, my ethernet cable is good, IPs are matching, EDS is good too. It's like my robot cannot handle the exchanges of datas. Tried on port#1 and then port#2, did the same thing.
I really wanted to use that option, if someone had ever see this case ?
Thanks!