resolved

Now you have three posts where you describe the same failure!

And

And this one, don't open a fourth one, you don't get more answers with spreading your problem over all open threads

As already told:

- tell us what exactly you have done for restoring, above you only say 'restore' but didn't say what and how you restored.

- probably you have restored a wrong image

- after every change perform a cold start, best practice on KRC2 is switching off hybernating.

Now you have opened the fourth thread

What the heck?

The error rdc and hdd data inconsistent is typical when restoring backups from wrong robot type or switching rdc. There are many threads in this forum dealing with this and how to fix it. Just use forum search.

I am sorry. Considering your previous attempts to setup something, blindly doing stuff with no clue what you are doing I think it is time that you either hire professional help or get some training. Considering all of your threads I see no organized laid out plan on how to do things and what your plan was to begin with. Only one cry for help and random trials getting things done after the next. No real explanations what steps you took so far in detail. Something you maybe can not do because your knowledge level of KUKA seems to be too low.

The forum in my opinion can not be a substitute for formal training or saving you some money. It can only point in directions or discuss ideas. I would recommend a complete roll back to your last working hardware setup and software configuration and then get some qualified external help.