AB CompactLogix L35E to RC8 via EthernetIP

    Hello all,


    I am trying to set up EIP comms between AB CompactLogix L35E to RC8 via EthernetIP. I installed the EIP option board, activated the license, set the input and output config on both PLC and Robot and communication kinda works :thinking_face:

    I can send outputs from the robot to the PLC no problem but not from PLC to the robot.

    It also says connected on the IO screen top right corner of the teach pendant but frequently (every few mins) says dissconnected and displays Error 8350200B Preparing for the field network communication. The network recovers by itself but drops out all the time


    Any ideas?


    Thanks

    Here are my settings:


Advertising from our partners