follow the bite of an alrm to ladder logic dx200

hi all

how can i flollow the bite of an alrm to the ladder logic or from an external input

in my caise i want to know the external adresse #2xxxx that gave the wire sticking alarm i have the sks welding system

Robodoc i do that but without any result i found the label of wire stick in the datasheet related to the external input 25144 but i cant find it in both user and system ladder in my rorbot i think they use that address when the welding system were from yaskawa in my case we use welding system from sks

is there any othe methode to know the external input that related to that alarm

Quote from 95devils

Here is what part of your system side ladder should look like.

95devils i found it in this document. the external input related to wire stick is 25144 but i can t find it in both user and sytem ladder in my robot i made a research but without any result i think yaskawa uses this address with their own welding system .we use a welding system from sks

is there any other methode to follow that alarm to know wich external inut related to it