Profinet I-Device ID

Hello,

I'm trying to make connection between R-30iB Plus v9.30P/16 with CP1604 card and PLC S7-1513F. I can see CP1604 from TIA Portal, but how can I be sure that robot system sees CP1604? Because there is just nulls on Device ID and Vendor ID fields for I-Device. Am I right supposing that robot system should define it by itself? Or I've got to change it manually?

There's just I-Device should be used in robot. And some screens attached.

Yes, IDs changed after downloading configuration of CP1604 in TIA Portal. Also modules on Transfer Area screen appeared. Thank you!

Here's screen with versions of CP1604: