Hello!
Has anybody found cause of 8301 BATCH ENQUE INVALID (1) alarm?
This is a system with Motopick 4.2 and MPP3 robots. 1 camera triggering in the beginning.
Alarm comes randomizely, mostly in re-pick.
Thanks!
Hello!
Has anybody found cause of 8301 BATCH ENQUE INVALID (1) alarm?
This is a system with Motopick 4.2 and MPP3 robots. 1 camera triggering in the beginning.
Alarm comes randomizely, mostly in re-pick.
Thanks!
Straight out of the MotoPick manual.
The robot has received a BATCH_ENQUEUE signal for a feed that is either unused or has al-
ready reached its batch capacity.
Please HALT and re-LAUNCH the system.
The SUB code indicates the slot number of the
feed that caused the alarm.