Hi, I only use .STL files for 3D import.
I've never imported 2D and now I was looking at the tutorial from roboguide and I didn't see an option to upload a 2D file anywhere.
You will probably have to do it only through 3D.
Yes, I meant that you add some small height to 2D, for example 5mm, to make it 3D and you can upload it.
I would save it out as an image, then apply the image to a face of an appropriately sized box.
.. I'm trying to import floor plans so I can have everything in my cell at the correct location...
What do you mean by 'everything', how do you create 'everything' ?
Normal procedure is to create everything as 3d in AutoCAD, export it as stl, igs or whatever you can import in Roboguide, everything in respect to the same reference point. Then import it to Roboguide, set the origin of 'everything' to 0,0,0. Doing it this way you have 'everything' in the right place.
As described: import everything in AutoCAD, move everything to the right place, export everything as 3d in respect to the same reference point, import to Roboguide, set origin to 0,0,0 and you are done.
I usually convert to .dxf when working with AutoCAD because it is an acceptable file format in RG.
