Hi all,
Is there any way to have a DCS user model only enable when a certain digital input is on?
DCS enabling using IO
-
Samwebber44 -
February 12, 2024 at 10:55 AM -
Thread is Unresolved
-
Hi Samwebber44,
As far as I know this is not (directly) possible. (maybe I am wrong)
You can use a different CPC with other UserModel attached.
The CPC's can be disabled/enabled using various IO(types)
Keep safety in mind!
-
Look up DCS tool change (in the DCS-manual).
That way you can specify to use [whatever tool is currently active]'s User Model in your CPCs.
You do need to use safe signals to switch between the various user models/DCS Tool Frames. Also, this will make the DCS Tool Frames linked to your TCP/Tool Frames, so if changing the values of the TCP, you will need to apply changes to DCS.
Advertising from our partners
