Roboguide Ripe connection and IIC configuration

Hi, I ´m trying to configure a cell in roboguide with 2 robot using the IIC option (intelligent interface check) option

I´ve configured the Host name and the cell RIPE to allows the 2 robot to communicate with each other, but when I try to calibrate the robot in interference menu, -> Calibration between robot I ´ve no robots to add to Manager/Member configuration.

There is more to configure than cell-> Ripe setup and host comm ip address? Thanks

yes and no... The problem was than I´ve loaded the wrong options. but I ´ve tryied this option with 2 robot mounted on a 7th rail axis, and this option doesn´t work in this case.

Yes, it works with 2 Robot, with the first axis configured as linear axis, working on the same rail, but my case was 2 robot with 6 axis, moving on 2 different rails with the 7th axis. In this case this option doesn´t work.