I have a 6400 here with s4c controller and every time the power goes out I get the attached message saying "Battery backup on serial measurement board 1 on measurement system 1 lost since last power down or restart". I then have to go through and update rev counters.
I have checked both batteries (robot & controller) and they were fine however I replaced them anyway just to be sure and it still brings up message every time. Any Idea what would be causing this?
Also not sure if it is related, nearly every time it powers up it blows the breaker in the shed at first however if I flick the breaker on again it stays on and runs fine until there is another power out. I put this down to the wrong type of breaker being installed.
We normally wouldn't have very many power outs, however we have been getting a lot of bad storms lately and power outs are becoming more frequent.