Allocation to a Station error - OTC FDNB6 Robot

When I try to load the program, I have no issue. But when I turn on the Motors, I get this error.

I followed these steps to debug the issue.
1.The robot is named as NB6, and the consecutive programs are named in Block level as NB6.2030.

2.I converted the program to ASCII to check the issue and I opened up the Backup in FD-ST(x-64).

3.I could see the Robot being miscalled in as UNIT-6(NB6). Would this be the reason?

Hello MOM, I sorted the issue out. The Cell was setup with the Robot has UNIT 6 and the program was giving me that error because the Operation Constants and in Condition for Multi station starter, I had to specify the program in specific Station.