Grab the Tooling in Roboguide

Hi,

You're probably grabbing the tool model (the CAD) rather than the TCP.

First off, when you are done with positioning ANY CAD-model in Roboguide (such as the tool model or a fixture), make sure to check the box "Lock all location values":

This will prevent you from accidentally repositioning the CAD-models.

Next, make sure that the "Teach Tool" (the green sphere) is visible (this is in the property window of the robot):

Here, you can also change the size of the green sphere to make it easier to "grab" it.

Also, there is a button in the toolbar in Roboguide that looks like a green coordinate system with a padlock at the bottom right:

This button will select the Teach Tool (and while this button is toggled ON it will prevent you from selecting anything else in the workcell).
This button can be useful if your robot's TCP is inside of a box/container or a machine or similar where you cannot "grab" it without accidentally selecting another object/CAD-model in your workcell.