Hello.
What is the aproximate cost for basic edition new kuka kr210
and the same category robot for other manufacters (fanuc, abb, yaskawa)
Thanks
Cost of new robot
-
javaman -
September 17, 2023 at 7:12 AM -
Thread is Unresolved
- Go to Best Answer
-
There is not only one basic KR210. There are many different variants available.
The actual price depends on many different factors, such as:
The total number of robots bought from a manufacturer, if you are an KUKA Official System Partner, FANUC ASI, ABB Value Provider, etc., if you are a system integrator, etc. All these things can have a significant impact on the individual price/discount.
Basically one can say that the list price for a FANUC or KUKA is normally less than for a (comparable) ABB. I can't say anything about Yaskawa because I have no experience with them.
-
What is the price for 1 robot ? (not discount price)
What robot? A KUKA KR210? If yes, it really depends on the variant you are planning to buy. There are huge differences.
To get a reliable price I would recommend to contact your local KUKA sales rep and ask for a quote.
-
prices of robots vary a lot because of features, applied volume discounts, etc.
if you want to know the price, you will need to talk to seller.
-
- Best Answer
I mean a simple krc4 kr210 basic software no software extras standard accuracy no ip67
There is not the one simple basic standard KR 210. See the overview about the available variants.
I would guess that the list price for a (more or less) basic KR 210 R2700-2 will start from 50k or 55k (€ in my case). But again, for a reliable price you should contact KUKA sales (or whoever the seller is).
-
Sorry, I don't know much about this but you can contact the manufacturer or authorized distributor for exact price information.
Then why post this comment if you can not add to the conversation anything of value?
-
Then why post this comment if you can not add to the conversation anything of value?
I suppose it's a bot.
-
I did too, that was a test to see.
-
Sorry Javaman, but I think that you can't have a credible answer here.
You don't have other solution to call the different manufacturers.
All other answer will be stupid or bad.
As DS186 said, the price is depending of many information.
You need to know that the robot's price is only a small part of the installation, so even if you got an answer, this information will be incomplete.
...
Advertising from our partners
