I face with a situation on a Kuka KR150-2 KRC2, KSS 5.6.6. When try to jog in manual mode T1, at first deadman switch press Interpreter I become green and allow to jog the robot axis, but when next one trial interpreter icon remain red I, and robot cannot be moved, even driver relay is heard that been activated. That happen when using white long deadmans, if is used the white button the interpreter is activated and axis can be jogged.
It could be a matter of KCP hardware or is a software error somewhere?
The error message is Drives contactor off, intermediate circuit loaded , code 200.
Thank you !