I never saw this before we greased our robot the other day, axis 1 there was no grease coming out. I looked down below the base and it looked like all the grease in just laying in the base that we pumped in. I didn't know if there is a tube under there that came off that goes to the joint or if we lost a seal. We just had the robot cables 4 days before we greased it so I didn't know if they knocked something loose. Ill attached picture of the robot tags.
Fanuc Greasing
-
Brendana22 -
July 17, 2023 at 3:46 PM -
Thread is Unresolved