Alarm 4203 and 4228

    Hello,


    At the first you need to solve the alarm 4228.

    This alarm show robot lose some data in the jobs same as positions data.

    If you have backup from your jobs, you can delete all controller jobs and load again.

    Also you can go to SETUP menu , wrong data log menu and under UTILITY menu, press RESTORE and restart controller. You must do it for any page is active in the wrong data log menu. There are document for it, search for it.

    After solve this alarm , the alarm 4203 will lose too.

    See below link, there are a manual that can help you, it is for NX100 but can help you.

    Post
    4228 - "Wrong date" version 3.00 too much *** before a label
    hello ,


    in origins my job was:
    * LABEL1
    ....
    JUMP * LABEL1


    Now, I do not know why,but my job is this:
    ****LABEL1
    ....
    JUMP * LABEL1


    if I try to save the job and reload it , i have this alarm 4228 - "Wrong data log"

    if with text editor I remove the 3 * more ',i can reload the job without problems

    thanks
    alex6885

Advertising from our partners