Data exchange between GOT2000 panel and robot

    Hi all, I need to data exchange between robot and GOT panel. Especially I need send string from GOT panel to robot. I need it for save recept name in robot.

    How to do it ?

    Thank you for advice

    • AD
    • New

    I use for HMI panel GOT2000, GT27-VTBA and Robot RV-6SD, connected via FTP cable (MITSUBISHI ELECTRIC gateway), Ethernet multi protocol. I normally communicate using M_In/Out16 instruction, but I need to send the string. I made a script that sends the string character by character, but that's not a good solution.


    Do you have a idea how to do it ?

    • New

    if possible i would just send numbers and do something like this


    (pseudo code incoming)


    select M_in(numberFrompanel)

    case 1

    callp "jobYouWant"

    break

    ....

    case 100

    callp "lastJobYouWant"

    break

    end select


    iirc string caused me some headaches in the past, so i covardly find my peace in number sending

    • New

    You can also put the string on GD devices of the GOT and copy it via a script.


    [w:U3E0-10702]=105; //Function No=Write position value �iASCII)

    [w:U3E0-10703]=[w:GD1303]; //Slot No

    bmov([w:GD1310],[w:U3E0-10710],8); //Variable Name


    set([b:U3E0-10700.b0]); //Request for variable operation ON

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account
Sign up for a new account in our community. It's easy!
Register a new account
Sign in
Already have an account? Sign in here.
Sign in Now