Never seen that one. Sounds like you might need a KSS update or a newer version of MS.
i installed MultiSubmit on number of robots with various KSS versions (8.3+) but never run into this problem.
For KSS you actually get a three digit number like KSS 8.3.38
Important here is the third digit (in this case 38)
Now we have one with the problem and two without:
Two questions:
- what is your third digit number on KSS version
- what is the complete version number of the MultisubmitInterpreter
Having this table could be very helpful to trace the problem down
Yeah ive installed it on a number of robots and never seen this. I re-imaged the robot as well because it took 15 minutes to boot into windows..
what do you mean by that?
Normally, when robot is booting then kuka software is not involved!
In this case I would think that there another problem
Did you make a cold start with rereading all the files or just the normal way? This could be a problem then
