Compatibility KPP 600-20

  • I have a KRC4 robot with a KPP 600-20 installed which has the article number 00-198-259.
    I need to replace it, but I noticed that the HW version of my part is 2B, while the replacement I found has HW version 2A, but the same article number.

    Are these models compatible?

  • Place your Ad here!
  • MOM

    Approved the thread.
  • yes, you can replace one KPP600-20 with another KPP600-20.... or KSP3x40 by another KSP3x40

    as far as i know this is not an issue even if article number is different or internal HW/FW and appearance of the unit are different... at least this was never an issue so far. Newer KSS also don't make a fuss if the replacement is different as long as it is same or higher performance.

    for example KSP3x40 (40A version) can be replaced by another KSP3x40 or KSP3x64, but not KSP3x20.

    on older KSS that works too but requires modifying WoV project (must match installed hardware)

    btw. here is an example of drive packs (KPP/KSP) with different appearance (curved vs flat front):

    1) read pinned topic: READ FIRST...

    2) if you have an issue with robot, post question in the correct forum section... do NOT contact me directly

    3) read 1 and 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account
Sign up for a new account in our community. It's easy!
Register a new account
Sign in
Already have an account? Sign in here.
Sign in Now

Advertising from our partners