Can you help me with documents or information to be able to link a camera with the dx200 controller, it will be a keyence camera.
integrate a keyence camera to dx200
- alejandrofts
- Thread is Unresolved
-
Nation
Approved the thread. -
How is it communicating with the controller? Ethernet I/P, serial, DeviceNet, etc?
-
The Keyence camera can connect to the Yaskawa controller via Ethernet when you have active Vision function. If the Vision function is active you give a new menu on the pendant and also some instructions for send trig and give data.
If you are using Ethernet/IP protocol, you need to do some setting in the Yaskawa controller and also the Ethernet/IP must be active on your controller. I didn't use this before.
Other method is use Motoplus, ask from Keyence maybe they have a file to this communication.
Other method is use MotoGSI and it need to special jobs too.
Advertising from our partners
