Is there a way to load an AOA backup into a robot in roboguide that is already created? I have been able to load a backup when creating a new robot but i want to be able to update program changes to use in roboguide without having to redo a new robot every time. any help with this is appreciated. thank you
help with loading a AOA backup into a roboguide robot without having to create a new robot
- CKing928
- Thread is Unresolved
-
kwakisaki
Approved the thread. -
Do it like on a real robot. You can use the virtual TP in roboguide to load the backup.
Locate the folder where your project is stored, there is a folder /UD1 somewhere under that folder.
Put your backup into that folder, and you will see it in the virtual TP with the menu topic 'File'.
-
In the Cell Browser, right click the robot, click properties, Serialize Robot, create a robot from a file backup.
-
As TitusLepic wrote
Serialize Robot is the "easiest way do go.
Right click the robot arm icon not the controller icon
I always go this way. And if errors occur i use the "classic" way hermann wrote.
Advertising from our partners
