I have a NX100 controller that I cannot get to ftp. I am able to ping the controller, As far as I know, I have all the correct parameters set in the controller as listed below.
If someone can point me as to what I need to change to make it work. Thanks in advance.
System : NS3.9G.00A(US)-68
PARAM : 5.12
Model : E165N-B0*
Lang : 3.9G-68-00
CPU
NCP01 : 3.9G
NPP01 : 3.84-68 3.00
AX*#0 : 3.9B-68 2.00
Robot IP - 192.168.2.124, Mask - 255.255.255.0, GW - 192.168.2.1
FTP Terminal - 192.168.2.2, Mask - 255.255.255.0, GW - 192.168.2.1
PP FTP Setup Host Addr : 192.168.2.2 - USER ID: rcmaster - PASSWORD:99999999 = Directory:/
FD77 = 1
FD122 = 1
RS000 = 2
RS003 = 5
RS006 = 1
RS029 = 1
RS030 = 8
RS032 = 2
RS033 = 7
RS034 = 100
RS035 = 200
RS036 = 10
RS037 = 3
RS050 = 8
RS052 = 2
RS053 = 6
RS058 = 3
RS070 = 192
RS071 = 168
RS072 = 2
RS073 = 124
RS074 = 255
RS075 = 255
RS076 = 255
RS076 = 0
RS078 = 192
RS079 = 168
RS080 = 2
RS081 = 1
RS082 = 192
RS083 = 168
RS084 = 2
RS085 = 200
RS086 = 150
RS090 = 60
RS091 = 255
RS100 = 8RS101 = 2
RS103 = 8
RS104 = 100
RS105 = 20
RS106 = 100
RS107 = 3
RS108 = 100
RS113 = 8
RS114 = 10
RS115 = 3
RS116 = 10
RS117 = 1
RS123 = 124
RS133 = 7
RS134 = 10
RS135 = 2
RS153 = 7
RA170 = 4
RS172 = 16
RS173 = 5
