Hello guys,
I am looking for an EDS file for R30iB controller’s devicenet network. I downloaded an Eds file from robot’s backup comm config. But I have a hunch it’s a Ethernet IP file and not devicenet. All help will be appreciated. Thank you
EDS file FANUC robot devicenet
- GSARRY
- Thread is Unresolved
-
If you go to the file menu, and select comm config, it should write the .eds file to whatever device you have active. I recommend UD1 for the usb port on the cabinet. If it has multiple comm methods, you will get multiple .eds files.
Source: Just did a robot with Ethernet/IP, Devicenet Safety, and Profinet on it.
-
Correct me if I am wrong, but are not eds files for Ethernet/IP only?
-
.eds is the file for ethernet/IP and I believe ethernet/IP is the standard communication protocol on the R30iB. Your robot could have devicenet and/or others, but they would be options.
-
Correct me if I am wrong, but are not eds files for Ethernet/IP only?
EDS can represent devicenet devices as well.
Advertising from our partners
