GOT1000 project to GOT2000 - RV6-SD

kralikbo · January 25, 2023 at 8:08 AM

Hi all,

I have a HMI GT15/GOT1000 panels - GT1585-STBA and GT1575-VTBA with robot RV-6SD. I am using GT designer 3 GOT1000 and I want to change setting "GOT type series GOT1000" to "GOT2000", becouse I want to use features "View receipe". Features is not available for GOT1000 set. Can I do it ? Is it safe ?

Thank you for advice.

sCZot · January 25, 2023 at 4:17 PM

hello,

personally I have never encountered problems during conversion from got1000 to got2000, but I would definitely proceed with caution before starting in the automatic mode

kralikbo · January 26, 2023 at 7:58 AM

I think main problem is different type of "GOT type". We have a model GT15, not contain this model in GOT2000. Can I change to enother model (GT27 and more) in project ? I think, this is problem.

sCZot · January 26, 2023 at 8:34 AM

i just did the conversion from GT14 to GT27 (320x240 res to 1024x768 res) without any problem, once you select GOT2000 in type setting in System tab, it will close GOT1000 verion of GTdesigner and reopen your soft in GOT2000 version, than you will click throug short wizard helping you with conversion and its done.

kralikbo · February 13, 2023 at 12:22 PM

I changed to GOT2000, convert project, but Designer3 (GOT2000) can't connect to panel, test connection write - It is not connected to GOT2000.

Error code 01801006

sCZot · February 13, 2023 at 1:49 PM

are you using right connection path with right settings?

kralikbo · February 14, 2023 at 2:05 PM

When I use GT designer3 (GOT1000) with USB connection (ETH card is not available now), it working properly, if I convert project to GOT2000 and check connection via USB, not connection.

Device manager in Windows show 'Mitsubishi GOT1000 USB Controller.'

sCZot · February 17, 2023 at 9:59 AM

oh wait... do you have GT2xxxxxx panel? or are you trying to use GOT2000 on GT1xxxx panel?

kralikbo · February 17, 2023 at 11:07 AM

I have panel GT15 - GT1585-STBA. It iis GOT1000 panel. My question was, can I convert project to GOT2000 panel and burn it to GT15 (GOT1000), It is possible and save after burn ?

sCZot · February 17, 2023 at 11:41 AM

you cannot upload GT2000 project into GT1xxx panel, its diferent hardware, if you want to use some features unique to GT2000 you will have to upgrade

kralikbo · February 17, 2023 at 11:44 AM

Ok, understand, I check if any way to convert project.

GOT1000 project to GOT2000 - RV6-SD

kralikbo January 25, 2023 at 8:08 AM

Advertising from our partners

How to see your Job Posting (search or recruit) here in Robot-Forum.com

Tags