Hi,
I've found multiple posts about this message, however it still is not perfectly clear to me.
I keep getting the message:
PRIO-063 Bad I/O asg: rack 0 slot 1
PRIO-063 Bad I/O asg: rack 0 slot 2
PRIO-063 Bad I/O asg: rack 0 slot 3
The robot communicates with a PLC (PLC is master) via PROFINET. Controller is: R-30iB.
In my summary file i found:
DIN 1 - 256 RACK: 102 SLOT: 1 PORT: 1
DIN 257 - 384 RACK: 101 SLOT: 1 PORT: 1
DOUT 1 - 256 RACK: 102 SLOT: 1 PORT: 1
DOUT 257 - 384 RACK: 101 SLOT: 1 PORT: 1
According to this post (Settings to make Fanuc programming easier (From all of us)
101 Dual Channel Profinet I/O Controller V9
102 Dual Channel Profinet I/O Device V9
However, as far as I know, we don't use dual channel Profinet?
Could somebody suggest what I need to do, to prevent/solve these messages?
Thanks in advance,
Jarno