Hi all, I would set to "0" the parameter FD 042 on my DX200. can some one explain me how to do that?
many thanks in advance
Best regards
Hi all, I would set to "0" the parameter FD 042 on my DX200. can some one explain me how to do that?
many thanks in advance
Best regards
It need high level security (Yaskawa Mode), if you have it, you can change.
If you don't have, you need to contact Yaskawa to change it.
That is a paid option. If you don’t have the dongle, you need to contact your local Yaskawa office.