Hi everyone.
I created a user screen on Teachpendant. I want to draw a button that when I push that button, a program will be called (to move Robot to a point or do calculation..).
Is it possible?
Please help me. Thank you very much
Call program via a button on User screen
-
linh_hn_vn -
December 7, 2022 at 12:54 PM -
Thread is Unresolved
-
linh_hn_vn
December 7, 2022 at 12:54 PM Changed the title of the thread from “Call program via a button in User screen” to “Call program via a button on User screen”. -
If you want to call the program using Interface Panel, then make the condition for running as External
- Make Teach Play condition to Run the Robot with External for Motors ON, Playback mode Program sel
- Assign Interface Panel for
2 buttons(Push Button Stay-3002) for Ext Stop, Ext Motors ON
1 button(Input 3 digits-3030) for Prog No
1 button(Push button Release-3003) for Ext Start
- On the software PLC, Link the above Outputs to the Input.
- In the Input Signal assignment-Assign the above Inputs for Ext Stop, Motors on, Prog Sel, and Ext Start.
-
Thank you very much, bsrr.
I understand your solution
. It is creative and helps me a lot.But is there any solution that doesn't require to modify PLC program?
-
I have no idea
Advertising from our partners
