Hello my friends.
I'm having some problems with RX130 CS8.
It's stuck on this step
Best regards
Robot stuck in initialization
-
16000lc -
November 8, 2022 at 1:52 PM -
Thread is Unresolved
-
... looks like problem with flash/hdd - corrupt OS - try to boot from back-up usb/floppy ...
-
... looks like problem with flash/hdd - corrupt OS - try to boot from back-up usb/floppy ...
Hello.
We tried various memory cards and none of them worked. And we tried all of them in another controller and it booted up without any problem. So we are thinking the problem comes from the board or the USB connection between the computer and the back board
Best regards
-
...then it should be one of the boards... and it does not have to be main one.. - just switch one by one..- to see which one freezing system....
-
Hello everyone!
We managed to boot up the controller.
It was this board that was damaged(it's attached to the main one of the drives behind the batteries)
We figured it out through trial and error.
Best regards
Thank you for coming back and posting the solution!
Advertising from our partners
