Hello,cr-7 not crx
I appreciate any help you may offer
I am working with a green cr-7 iaL. I want to use it with a flex feeder for picking parts.
My problem. When I plug my camera into the long cable that runs into the controller and I'm looking at the live video feed through my browser, there is a black band moving up and down. Like a movie reel, it just keeps moving across the screen.
I've flipped its little dip switches, it's a Sony xc 60 I think.. one of the switches seemed to add a vertical lime but then I had a cross most of the time and the image is moving also.
Viewing through internet explorer on pc
I also have no control over the camera by the value in the window in the upper right. When I change the exposure values in the window it doesn't seem like it does anything.
I'm unsure of what was purchased but I do see the irvision setup so I assume I can do the 2d pick process for various parts.
Just not sure where to go, it's a robot that's just been sitting and not been used and had a box of parts where I found the camera.
I also have a cognex Insight9912 that I could use but I think I would like to try this first as I think it would be easiest.