KUKA KTL CABLE NOT WORKING

  • Hi! We bought a KUKA KTL for KRC2, today we tested it with the tool and it only worked with our cable. The cable that came with it didn't work.

    Our cable is 4 pins and the one that came with the KTL is 7 pins as shown in the pictures below.

    Is there any particularity? Do you know why it didn't work with the 7 pin? There is and adapter wich we did used, but even then, it can't find the reference spot.

  • Place your Ad here!
  • of course things will not work if you have a bad connection.

    KTL or EMT is designed to work both with KRC1 and KRC2 based systems which is why there are different wiring options.


    if i was in a possession of EMT that may not work, i would much rather have bad cable than bad probe. cables are easier and cheaper to replace plus they can be tested using very simple and common tools.

    1) read pinned topic: READ FIRST...

    2) if you have an issue with robot, post question in the correct forum section... do NOT contact me directly

    3) read 1 and 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account
Sign up for a new account in our community. It's easy!
Register a new account
Sign in
Already have an account? Sign in here.
Sign in Now

Advertising from our partners