Editing a instruction on teach pendant

    Hello everyone.


    Does anyone know if it's possible to edit a instruction on the teach pendant of an RX130(CS8)?


    There's some changes I need to make to an application but all i've been doing so far is copying/pasting the instructions, make the changes on the new ones(which appear as editable) and delete the older ones.


    Is there not an edit button? Can't find it



    Thanks

    Best regards

    You can edit and modify your programm directly on the SP1.

    - Make a backup

    - Menu/Application Manager/Val3 application/...your application.../Programs/...you program...

    - Edit


    Don't save before to test you modification...

    That part I’ve got so far. The thing is, after I’m inside the program and I’m with the cursor over an instruction , there is no edit button to edit the specific instruction. Only solution I found was insert a new one and delete the older one.

    When you have selected the line, press "enter" to edit the line.


    You can choose Prg to call a new underprogram, Glo to jump in the Global variables list or Val3 to choose a new Val3 instruction (press the first letter to select directly in the list).

    Edited once, last by Galet ().

Advertising from our partners