how to set user keys for a desired purpose like gripper open / gripper close
Please help as soon as possible
User Keys
- Mangesh Shenavi
- Thread is marked as Resolved.
-
how to set user keys for a desired purpose like gripper open / gripper close
Please help as soon as possible
On FlexPendant drop-down menu, go to Control Panel -> ProgKeys. There's those Keys 1 to 4 that you could set up as needed.
-
Thank you sooo much
-
one more help please...
Can we use these type of keys in kuka robot teach pendant without any additional software (inbuilt functions or any other type to activate)
Thank you for both helps
-
On FlexPendant drop-down menu, go to Control Panel -> ProgKeys. There's those Keys 1 to 4 that you could set up as needed.
In order to allow in auto , the signal property " Access level " must be set to an access level that has the property " Local client in auto mode " set to " Write enabled " . These settings are found in the " Control Panel - Configuration " view .
I tried your procedure, but above message shows on screen.
But i does not found that in control panel - configuration - view.
Also I am new in ABB.
What i have to do now ??
-
Which message? Could you please post a picture?
-
In order to allow in auto , the signal property " Access level " must be set to an access level that has the property " Local client in auto mode " set to " Write enabled " . These settings are found in the " Control Panel - Configuration " view .
This one message 👆
-
The message gives you the answer. The signals you are using for the user keys need the access level stated in the message.
Did you define this access level and assign it to your signals?
-
Did you define this access level and assign it to your signals?
Respect sir/mam.
Will you please explain how to define access level & how to assign it to signals ??
I don't know more in ABB, just completed 1 month with ABB robot.
-
Do you have the system parameters reference manual? If not you can download it from the ABB Library. Everything you need to know about it is described there.
-
Advertising from our partners
