Hello everybody,
I'm having a problem with my RJ3, I was fitting safety fences to the 2 fence circuits. After re connecting the 24v bridges I cannot get rid of the SRVO-230 and SRVO-237 errors.
The 1amp fuse on the PCB with the fence connections had blown, after replacing this it seems like only one of the fence circuits are working. Both are receiving +24v but only one is activating the fence circuit and lighting the green LED on the PCB.
Can anybody give me some advice on how to fix this? I was wondering if there's a way to bypass the fence circuit just so I can get the robot functioning again.
Thanks, Matt.